When comparing karaoke mic vs normal mic, we find that they are different in terms of the purpose of use, durability, power requirements, and sound capture ability. A karaoke mic is usually a dynamic mic. It can capture live sound better than a normal mic.
To see the difference between these two mic types, read on to the sharing below to discover more!
Karaoke Mic Overview
Perhaps you have been to Karaoke, but not sure you know about karaoke mic.
What Is Karaoke Mic?
Karaoke mic is a dynamic mic, and it’s not like a normal mic. It picks up live sounds pretty well at close range. Therefore, people often use it in singing or karaoke rooms.
There are many different types of microphones on the market, but not all types of microphones can sing Karaoke well. The karaoke mic has many other configuration points to bring out the best sound for the singer.
You should know that karaoke mics will be utterly different from those used to sing in the studio or on stage.
Structure of Karaoke Mic
As mentioned above, karaoke mics are usually dynamic mics. It has a structure like an electrodynamic speaker and has a thin film inside. The coil inside the karaoke mic has many turns and has an impedance of about 300 ohms.
The frequency range of karaoke mics is usually from 50 Hz to 16 kHz. Its sensitivity is relatively low, but it has a sweet and soft timbre. So people often use it in karaoke bars or at home.
In particular, the karaoke mic uses electrodynamics and magnets to change electrical waves. It doesn’t need an energy supply to operate.
Karaoke Mic Types
There are many variations of karaoke mic on the market, but the most popular are still wireless mic karaoke and wired mic.
Karaoke mic wireless is the type of mic that appears in most karaoke bars today. It does not need a connection wire to transmit signal and sound. Some types of wireless mic karaoke even do not need a power source and can still work well.
Wired karaoke mics usually connect the mic to the source or the karaoke machine with a wire. The transmission line of this type of mic is stable, but now it is no longer popular. Its extension cord is too cumbersome for people to move freely.
Normal Mic Overview
To better understand the normal mic, we will learn important information about it.
#1. What is Normal Mic?
The normal mic is a condenser mic with mid-range quality and people use it for low-cost appliances. People use it mainly for recording and amplifying sound.
If it’s a high-end condenser mic, it’s popular in studios for song recording or dubbing. But the normal mic on the market is cheaper. The primary use is to amplify the sound.
#2. Structure of Normal Mic
Because most normal mics are electret condenser mics. Inside the normal mic, there is a very thin metal diaphragm and backplate. It has much greater sensitivity than dynamic, wide audio frequency range (from 20 Hz to 20KHz).
But because it is a cheap condenser mic, the normal mic belongs to the electret mic line. This type of mic appears commonly on mobile phones, computers, or hearing aids.
The normal mic cannot handle high-pressure sound. It is also easily damaged in the event of a collision due to its somewhat fragile structure.
Compare Karaoke Mic vs Normal Mic
The difference between a karaoke mic and a normal mic is clearly in the following items:
- Power requirements of mic
- The ability to capture audio
Perhaps you have used a karaoke mic when going to Karaoke, but you will not discover its difference. To see how karaoke mics differ from other mics, check out our in-depth analysis!
#1. Mic Power Requirements
Most other mics need to be connected to a power source to work, but karaoke mics do not. It’s a dynamic mic, so it works fine without a power connection.
You can see it when singers use head-mounted mics to perform. Although the mic is compact, they still have to wear a small box as a power source.
Many people rate that Karaoke mic has much better durability than conventional mics. It can work with sound with high sound pressure levels without damage.
During a lively activity like Karaoke, dropping or bumping the mic can happen. However, the karaoke mic is fully adaptable.
Because it is a dynamic mic, normal bumps will not be able to damage the karaoke mic. A regular mic is more sensitive because it is a condenser mic. Some types of normal mic will fail when the sound is too loud.
A typical mic can’t withstand even a light impact. You often accidentally drop it, and as a result, you have to replace the mic with a new one. If we use the typical mic in Karaoke, we have to replace it constantly. It is costly to do.
#3. The Ability To Capture Audio
Karaoke mic is capable of capturing sounds at close range. It works well with live audio. In conditions of a lot of background noise, it will still capture the best loud sounds.
Part of the reason is that it does not have the sensitivity of a condenser mic. It can perfectly capture vocals in the crowd. However, if the sound source is far away, it doesn’t seem to work.
Normal mics can capture sounds that are further away. It is also sensitive to small sounds. As long as there is an oscillation frequency, most of it will pick up.
The disadvantage of a normal mic is that it cannot work with loud sounds at too close a distance. Sound pressure can destroy its internal structure.
How To Take Care of The Microphone?
Whether it’s a karaoke mic or a normal mic, you also need to take care to prolong its life. You should limit movement or let the microphone collide. Regularly clean the dust on the mic and leave it in a place with little moisture.
If you know how to take care, your microphone will work stably and better. Of course, you will also not lose money to repair or replace a new one. Learn the following microphone care needs.
#1. Movement Restrictions on Collision
The internal structure of the microphone is very fragile. Just a few bumps can damage internal components.
Although karaoke mic is more resistant to impact than other mic types, you should still limit moving it. Although it is not damaged, it can reduce the quality of the recorded sound.
Moving the microphone is also not suitable when making it move too much, especially the mic in the studio. The thin film inside is straightforward to tear on impact.
#2. Regular Cleaning
In the process of using the microphone to capture sound, it is also easy to attract dust. You should not use the mic in the presence of dust and must regularly clean it.
Dirt that accumulates on the membranes of the mic will degrade the sound quality. If left for a long time, the dust layer can damage the mic.
#3. Limit Humidity Around Mic
Mic, whether using a power source or not, is an electronic device. It is susceptible to water. Moisture can cause the mic to stop working.
Therefore, you should keep the mic in a cool and dry place. Do not leave it in an enclosed environment if you are in a hot and humid climate. It is better to keep the mic in a padded carrying case than in a bubble bag.
Can I use a normal mic to sing Karaoke?
I am not sure about this. Maybe you can still use a normal mid-range mic to sing Karaoke, but it will break very quickly. You’re even hitting a high note and popping. All the sounds disappear.
However, with more advanced condenser mics, you can sing professional Karaoke without worry.
Can I use a karaoke mic to record in the studio?
You can use a karaoke mic to record, but it doesn’t work well. The results you get will disappoint you. Karaoke mics are usually dynamic mics.
You should choose a condenser mic for recording. This mic works very efficiently and professionally.
Karaoke mic more expensive or cheaper than a normal mic?
Usually, low-quality normal mics will be much cheaper than karaoke mics. However, some high-end lines of standard mic cost more than karaoke mic.
In general, the price will depend on the quality of the mic you choose.
Karaoke mic vs normal mic will have more durability and popularity. However, both bring many benefits to human communication and entertainment activities. Hopefully, through the information that we share, you can better understand these two types of mics.
Thanks for reading this post!